Brands
- 221B Tactical
- 3M Peltor
- 5.11 Tactical
- 5ive Star Gear
- Adventure Medical Kits
- Accusharp Knife Sharpeners
- Aker Leather
- Arrowhead Forensics
- ASP
- AXIL
- Bianchi
- Blackhawk
- Blade-Tech Holsters
- Breakthrough Clean Technologies
- Camelbak
- CodeRed
- Condor Outdoor
- Damascus Protective Gear
- Earmor
- Eberlestock
- EO Tech
- ESS Eye Safety Systems
- EVI-PAQ
- Evolution Gear Australia
- Fenix Flashlights
- Fifty Fifty Bottles
- Fisher Space Pens
- FLIR
- FoxFury Tactical Lights
- Garrett Metal Detectors
- Ghost Holster
- Grangers
- Hatch Gloves
- Haven Gear
- Hazard 4
- Helikon-Tex
- Heroclip
- Hex Armor
- Holosun Optics
- Hoppe's Guncare
- HWI Gear
- Hydrapak
- Inova Flashlights
- KeyBak Retractable Reels
- Keysmart
- KORE Essentials
- Lansky Sharpeners
- Leatherman
- Ledlenser
- Leupold Optics
- Maglite Flashlights
- Magnum Footwear
- Magpul
- Mantis
- Maxpedition
- Mechanix Wear
- Merrell Tactical
- Mira Safety
- MOHOC
- MRE Star
- MSA
- Mystery Ranch
- Nightstick Flashlights
- Nitecore Flashlights
- Nite-Ize
- Notch
- Olight Flashlights
- On Track Meals
- Overboard Dry Bags
- Pelican Products
- Pentagon Tactical
- Plano
- PPSS Stab Resistant Vests
- Princeton Tec
- Propper Clothing and Apparel
- Punch Equipment
- Quiqlite Handsfree Lighting
- Rapid Assault Tools
- Real Avid
- Reebok Tactical Boots
- ResQme
- Revision Military
- Ringers Gloves
- Rite-In-The-Rain
- SHOKZ
- Silva
- Sirchie
- SLNT
- Smith and Wesson
- SOG Knives
- SORDIN Hearing Protection
- Spartan Training Gear
- Spyderco Knives
- Stealth Gear Holsters
- Streamlight Flashlights
- Steiner Optics
- Survive Outdoors Longer
- Tactical Targets
- Tasmanian Tiger
- Tatonka
- Trijicon
- Ultimate Carry Solutions
- Uncle Mikes
- Under Armour Tactical
- Ventura Tactical Systems
- VERTX
- VIKTOS
- VMI Security
- Voodoo Tactical
- Warrior Medical
- Wiley X
- Zak Tool
- Zan Headgear
- Zero9 Solutions
Featured Brands
RATOOLS-HRK2-2
Rapid Assault Tools Hydraulic Breaching Tool Kit
$10,154.50 - $17,194.50
Category: Breaching, Breaching Kits, Breaching Tools, Entry Tools, Government Sales Only
Highly portable and effective multipurpose hydraulic breaching kit. Choose between using the 5 ton Door Pusher that forces doors in directly or quickly install the Jamb Spreading extension rod to quietly spread the door jamb and swing the door open. Kit is available with optional bolt cutter and low profile spreader make this kit ready for any mission.
Quick disconnect fittings allow operator to switch tools quickly. The tools are powered by the quiet manual pump. Spring loaded handle allows it to be operated with a foot to keep hands free. High quality six foot long hydraulic hose is included. All tools and heavy duty carry bag are made in the USA.
Operating pressure: 10,000 psi (720 bar)
Kit Options
HRK2 - 2 in 1 RatSpreader™ w/ two stage pump in Carrybag
- Door Pusher HDP4
- Jamb Spreader rod
- Hand Pump/hose
HRK3-2 - 2 in 1 RatSpreader™ w/ two stage pump, HBC in Carrybag
- Door Pusher HDP4
- Jamb Spreader rod
- Bolt Cutter HBC30
- Hand Pump/hose
HRK4-2 - 2 in 1 RatSpreader™ w/ two stage pump, HBC and HS4 Ratwedge in Carrybag
- Door Pusher HDP4
- Jamb Spreader rod
- Bolt Cutter HBC30
- RatWedge HS4
- Hand Pump/hose
Kit Includes
Door Pusher: HDP4
- 4 inch (102mm) stroke
- 10,000 lbs. (44kN) of force
- Includes quick coupler
- Working Pressure: 10,000psi (690 bar)
- Weight: 7 lbs. (3.2Kg)
- Dimensions: 10 inch x 5 inch x 3 inch (254mm x 127mm x 76mm)
Jamb Spreader: JS41
- Screws onto end of HDP4 to create jamb spreader
- For use on jambs between 26 inches and 41 inches (66 cm and 104cm)
- 10,000 lbs. (44kN) of force
- Working Pressure: 10,000psi (690 bar)
- Weight: 6 lbs. (2.7Kg)
Hydraulic Bolt Cutter: HBC 30 (Included in HRP3 and HRP4)
- Suitable for cutting mild steel and other materials that are non-heat treated with hardness less than HRB80
- Drop-Forged steel alloy cutting jaws. Jaw opening at tip: 0.75 inch (19mm)
- Cutting capacity: .5 inch (14 mm) diameter less than HRB80 Hardness HRC 20
- 24,000 lbs. of cutting force
- Dimensions: 9 inch x 6 inch x 2 inch (230 mm x 155 mm x 50mm)
- Single acting steel cylinder with quick coupler
- Working Pressure: 10,000psi
- Weight: 6 lbs. (2.7 Kg)
3 Ton Spreader: HS4 (Included in HRP4)
- Rated Load: 3 tons (2,720 Kg) at blade tips
- Closed blade height: 0.16 inch (4 mm)
- Extended blade height: 4.44 inch (11.2 cm)
- Arm Width: 2 inch (5.08 cm)
- Length: 11.3 inch (28.70 cm)
- Working Pressure:10,000psi (700 bar)
- Weight: 7 lbs (3.2 Kg)
Highly portable and effective multipurpose hydraulic breaching kit. Choose between using the 5 ton Door Pusher that forces doors in directly or quickly install the Jamb Spreading extension rod to quietly spread the door jamb and swing the door open. Kit is available with optional bolt cutter and low profile spreader make this kit ready for any mission.
Quick disconnect fittings allow operator to switch tools quickly. The tools are powered by the quiet manual pump. Spring loaded handle allows it to be operated with a foot to keep hands free. High quality six foot long hydraulic hose is included. All tools and heavy duty carry bag are made in the USA.
Operating pressure: 10,000 psi (720 bar)
Kit Options
HRK2 - 2 in 1 RatSpreader™ w/ two stage pump in Carrybag
- Door Pusher HDP4
- Jamb Spreader rod
- Hand Pump/hose
HRK3-2 - 2 in 1 RatSpreader™ w/ two stage pump, HBC in Carrybag
- Door Pusher HDP4
- Jamb Spreader rod
- Bolt Cutter HBC30
- Hand Pump/hose
HRK4-2 - 2 in 1 RatSpreader™ w/ two stage pump, HBC and HS4 Ratwedge in Carrybag
- Door Pusher HDP4
- Jamb Spreader rod
- Bolt Cutter HBC30
- RatWedge HS4
- Hand Pump/hose
Kit Includes
Door Pusher: HDP4
- 4 inch (102mm) stroke
- 10,000 lbs. (44kN) of force
- Includes quick coupler
- Working Pressure: 10,000psi (690 bar)
- Weight: 7 lbs. (3.2Kg)
- Dimensions: 10 inch x 5 inch x 3 inch (254mm x 127mm x 76mm)
Jamb Spreader: JS41
- Screws onto end of HDP4 to create jamb spreader
- For use on jambs between 26 inches and 41 inches (66 cm and 104cm)
- 10,000 lbs. (44kN) of force
- Working Pressure: 10,000psi (690 bar)
- Weight: 6 lbs. (2.7Kg)
Hydraulic Bolt Cutter: HBC 30 (Included in HRP3 and HRP4)
- Suitable for cutting mild steel and other materials that are non-heat treated with hardness less than HRB80
- Drop-Forged steel alloy cutting jaws. Jaw opening at tip: 0.75 inch (19mm)
- Cutting capacity: .5 inch (14 mm) diameter less than HRB80 Hardness HRC 20
- 24,000 lbs. of cutting force
- Dimensions: 9 inch x 6 inch x 2 inch (230 mm x 155 mm x 50mm)
- Single acting steel cylinder with quick coupler
- Working Pressure: 10,000psi
- Weight: 6 lbs. (2.7 Kg)
3 Ton Spreader: HS4 (Included in HRP4)
- Rated Load: 3 tons (2,720 Kg) at blade tips
- Closed blade height: 0.16 inch (4 mm)
- Extended blade height: 4.44 inch (11.2 cm)
- Arm Width: 2 inch (5.08 cm)
- Length: 11.3 inch (28.70 cm)
- Working Pressure:10,000psi (700 bar)
- Weight: 7 lbs (3.2 Kg)