MIRA Safety Gas Mask Replacement Parts Kit

_____

IMPORTANT NOTE: MIRA Safety PROFILM is custom-fit for CM-6M gas masks ONLY, and will not work with any other MIRA Safety gas mask. 

Considering the developing situation in Europe, MIRA Safety are experiencing a drastic surge in orders and inquiries. The current lead time for in-stock products is estimated at 2-3 weeks. If you are not comfortable with waiting, please refrain from ordering.

If you have a question about a product, please make sure to read through the Q&A’s on the product page before sending us an email. Considering the volume of calls we’ve been receiving, please email us for faster service: support@tacticalgear.com.au

We are working around the clock to get orders out the door as soon as possible, and we greatly appreciate your patience as we work through this.

PROFILM Options

This kit is compatible with the CM-6M (all variants), CM-7M, CM-8M, and the TAPR. Please note, for the CM-7M, CM-8M, and TAPR, inner mask valves will not be necessary. 

The Essential Kit

(4) Inner Mask Valves – MIRA Safety gas masks come with an oro-nasal cup (also called an inner mask) to prevent fogging and help redirect the flow of CO2. These inner valves are meant to be installed on the oro-nasal cup itself, along with the inhalation ports to prevent the backflow of filtered air back through the filter.

(1) Exhalation Valve – This is one of the most critical components for ensuring your mask seals properly and performs reliably. The exhalation valve expands as you breathe out, then immediately snaps shut to protect you from dangerous environments. Your mask MUST have a functioning Exhalation Valve to work properly. 

(1) Exhalation Valve Cover – This cover protects the exhalation valve. While it sits snugly over the exhalation port and is made of robust materials, it should be replaced if you see any signs of damage or if it is misplaced. 

(1) 40 mm Plug – Most MIRA Safety gas masks have two ports for gas mask filters. By plugging one port, you can use a single filter for a lighter setup that’s easier to wear while shouldering a rifle or moving around.

The Deluxe Kit

The Deluxe Kit includes all of the parts included in the essentials kit, along with a replacement head harness. The head harness should be replaced every 10 years, or if you begin to notice that the elastic is stretched out, damaged, etc. 

--

IMPORTANT NOTES: As the head harness is different for the CM-6M and CM-7M, please make sure to select the correct Deluxe Kit for your model. These replacement parts are NOT compatible with smaller gas masks for children.

IMPORTANT SAFETY WARNING: Although installation is straightforward, we recommend having these parts installed by a professional respirator service center to ensure the mask seals properly after service. Professional respirator service centers use a negative pressure fit tester to ensure that there are no leaks after new parts are installed. If you choose to install these values yourself, make sure to conduct a negative pressure test to ensure the mask is properly sealing. 

MIRA Safety and its affiliates are not responsible for incorrect assembly, improper maintenance, or modifications of masks.